Products

Aramid fiber packing braided from high quality Dupont aramid and kevlar fiber with PTFE impregnated and lubricant additive. It is wear resistant but may damage the shaft is not used properly. A minimum shaft hardness of 60HRC is therefore recommended.

Kaxite Graph-super® P405-WWM Graphite Packing Similar as Kaxite P405. This style graphite packing is braided from graphite yarn with metal alloy wire and glass fiber casing like shell outside. All-metal coated structures greatly increased the erosion resistant of packing, make packing more compact, more robust, long life.

Super Graphite Packing specially for high pressure valves, braided from expanded graphite yarns with corrosion inhibitor, reinforced with inconel wire. Each yarn is round braided with inconel mesh outside again. The mesh is jacketed.

Jacketed Graphite Packing braided from graphite yarns with metal alloy and glass fiber casing like the socks outside. Used in any steam valves applications..

Graphite Packing with PTFE Impregnated is braided from Expanded graphite yarns which impregnated with PTFE as a blocking agent thus creating a non-straining packing. The yarns are reinforced by textile fibers.

Graphite packing with carbon fiber corners is a multi-fiber packing, braided from expanded graphite yarns and carbon fibers, the diagonally braided from graphite yarn, reinforced in all four corners with carbon fibers. The corners and body make the packing three times more resistant to extrusion and increase the pressure handing capabilities compared to traditional graphite packings.